| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on a port, on a switch or router that leads to an outdoor CPE unit.
The package also includes a wall plug with a screw and a special metal plate for attachment to a wall or rack.
RouterBOARD devices with "poe" labeled ports, support powering by Passive PoE over spare pairs, except where notified otherwise. This table explains Ethernet cable pinout for RouterBOARD devices, and shows powered pins for PoE on 10/100 and 10/100/1000 devices.
| RJ45 Pin | Color | Function (100Mbit) | Function (1Gbit) | RJ45 pin for Straight cable (MDI, EIA/TIA568A) | RJ45 pin for Crossover cable (MDI-X, EIA/TIA568B) |
| 1 | Green | TX+ Data | Data A+ | 1 | 3 |
| 2 | Green/White | TX- Data | Data A- | 2 | 6 |
| 3 | Orange | RX+ Data | Data B+ | 3 | 1 |
| 4 | Blue | PoE + | Data C+ | 4 | 4 |
| 5 | Blue/White | PoE + | Data C- | 5 | 5 |
| 6 | Orange/White | RX- Data | Data B- | 6 | 2 |
| 7 | Brown | PoE - | Data D+ | 7 | 7 |
| 8 | Brown/White | PoE - | Data D- | 8 | 8 |
Note: for Gigabit models, you have to use the MikroTik Gigabit PoE injector, that passes PoE trough pins 4,5 (+) and 7,8 (-). When using other PoE injectors, power can be passed on any other pins, depending on PoE injector model.
){kind=link}