| Customization: | Available |
|---|---|
| Application: | Computer, Digital Cameras, Mobile Phone, Mouse, MP3/MP4 Player, Network, Printer, Tablet |
| Color: | Black |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
USB TTL Serial Cable Series / TTL-232RG-VREG3V3-WE TTL to USB Serial Converter Generic Cables
USB to UART cable Supports +3.3V based TTL level UART signals
TTL-232RG-VREG3V3-WE: USB cable with wire-ended +3.3V logic level UART connections and +3.3V / 250mA rated power output.
The TTL-232RG-VREG3V3-WE uses a FT232RQ IC which is housed inside the USB 'A' connector, and is terminated at the end of a 1.8 meter cable with RXD, TXD, RTS, CTS and GND signals provided
Typical Applications
USB to Serial TTL Level Converter
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O to USB
Interface FPGA / PLD to USB
Interface to FTDI VDRIVE2 or VMUSIC2 modules.
Interface USB to none-standard (application dependant) logic levels.
Replace MAX232 type level shifters allowing for direct connection of products to PC via USB
USB Instrumentation PC interface
USB Industrial Control
USB Software / Hardware Encryption Dongles
The following Table gives details of the available TTL-232RG generic cables.
| Part Number | Description | End Connector* | Cable details |
| TTL-232RG-VSW3V3-WE | USB to UART cable with +3.3V TTL level UART signals. Maximum output of 50mA on VCC(see Note 1 and Note 4) |
Wire Ended (no connector) | 6 core, UL2464 24 AWG, diam=5mm |
| TTL-232RG-VSW3V3-PCB | USB to UART cable with +3.3V TTL level UART signals. Maximum output of 50mA on VCC (see Note 1 and Note 4) | N/A (no connector) | N/A (no cable) PCB Only |
| TTL-232RG-VREG3V3-WE | USB to UART cable with +3.3V TTL level UART signals. Maximum output of 250mA on VCC (see Note 2 and 5) | Wire Ended (no connector) | 6 core, UL2464 24 AWG, diam=5mm |
| TTL-232RG-VREG1V8-WE | USB to UART cable with +1.8V TTL level UART signals. Maximum output of 100mA on VCC(see Note 2 and 6) |
Wire Ended (no connector) | 6 core, UL2464 24 AWG, diam=5mm |
| TTL-232RG-VSW5V-WE | USB to UART cable with up to 5V TTL level UART signals. Maximum output of 450mA on VCC (see Note 7) | Wire Ended (no connector) | 6 core, UL2464 24 AWG, diam=5mm |
| TTL-232RG-VIP-WE | USB to UART cable with TTL Voltage levels for the UART signals are supplied from the customers interface logic (see Note 3 and 8) | Wire Ended (no connector) | 6 core, UL2464 24 AWG, diam=5mm |
Note 1: Fixed 3.3V signals and supply.
Note 2: Any regulator from 1.8V to 5V can be used. 1.8V and 3.3V versions are standard products. Other values are customized at the factory.
Note 3: Any INPUT voltage can be supplied by the customer from 1.8V (min value of VCCIO) to +5.25V (Max value of VCCIO)
Note 4: The VCC power output signal (RED wire) is 3.3V. The source of 3.3V is the FT232R regulator output, which is switched onto the power output signal.
Note 5: The VCC power output signal (RED wire) is 3.3V. The source of 3.3V is on board 3.3V regulator output, which is switched onto the power output signal
Note 6: The VCC power output signal (RED wire) is 1.8V. The source of 1.8V is on board 1.8V regulator output, which is switched onto the power output signal
Note 7: The VCC power output signal (RED wire) is 5.0V. The source of 5.0V is the USB VBUS input, which is switched onto the power output signal. At the time of releasing these cables, this cable was not available. It will become available at a later date. Please contact FTDI Sales for further information.
Note 8: The VCC power input signal (RED wire) is an output from customer electronics, an input to the cable. This value=i/pV. The source of i/pV is from customer's interface logic and this is used to drive the VCCIO and hence the signal levels on the wires. This makes the generic cable customisable to whatever output voltage the customer interface is operating at 1.8V to 5.25V range.
Our Factory supports FTDI serial cable Customised end connector designs. For more information, please contact your local sales on line directly
){kind=link}