ftdi chipset usb 2.0 to rs422/rs485 adapter cable/usb to rs485 rs422 idustrial Converter/USB to RS422 RS485 Converter Cable with FTDI Chip and TX, RX LED Indicators/to RS-485/RS-422 RS-485 Serial Interface RS485 RS422 RS232 USB Isolated Converter
Product Description
Compliable USB2.0 FTDI USB-RS485-WE-1800-BT CABLE, USB TO RS485 SERIAL, 1.8M, WIRE END
RS-422/485 interface in DB PIN connector
Design of automatic data(TXD) stream control and zero delay.
Baud rate:>1M BPS.
Automatic hand-shaking protocol supported.
Remote wake-up and power supply managerment supported.
+/- 15KV ESD powered
Working environment:-25 to 70,relative humidity 5% to 95%.
Win98/Win2000/WinXP/Vista/Linux supported.
Processor |
FTDI FT232RL |
RS485 Interface |
Included screw terminal header / single wires |
Fail-safe bias resistors |
Yes |
USB interface |
Standard Type A Male |
Ports |
1-port available for RS485 |
Signals |
RS485, 2-wire half duplex: D+, D-, GND |
Baud rate |
300-921.600bps (up to 3kbps by using alising) |
TX / RX buffer size |
256 Byte Transmit Buffer / 128 Byte Receive Buffer |
Adjustable USB transfer sizes for TX and RX |
From 64 bytes to 4096 bytes |
USB to RS232 / RS485 / RS422 converter products from Serialcomm the choice manufacturer of low priced data communication products without sacrificing quality and reliability. Our bidirectional USB to serial converters are powered by very reliable signal processors featuring the autosensing feature and operate reliability and flawlessly without the need for flow control or software drivers. All of our USB to RS232/RS485/RS422 converters come with optional terminal blocks for easy installation. All of our products are CE, FCC and RoHS certified
Detailed Images
- USB RS485 adapter
- USB2.0. full speed 12M support
- FT232 USB RS485 cable, signals compatible with USB-RS485-WE-1800-BT
- With 2 LEDs for data+, data- transfering
- Red-VCC(5v),Black-GND,White - Data+, Green - Data-
- FT232RL + SP485LEEN chip
- Support Android, Support Win 10, 8,8.1, Win 7, XP, 2000, Linux, Mac OS
- Integrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5
- Support FTDI VCP driver and D2XX driver
- Half duplex, non-isolated
- 300 ~ 1Mbps baud rate
- Up to 5km distrance transfering