Ftdi Umft4222EV-D Development Board, USB 2.0 Hi-Speed to Quad Spi/I2c, FT4222h, Vqfn-32

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop
• Type: Wired
• Model NO.: , FT4222H
• Support Network: Ethernet
• Information content: Data
• Certification: CE FCC RoHS
• Condition: New
• Chipset: FT4222h
• Warranty: 12months
• Product Name: USB2.0 to Quadspl/L2c Bridge Deyelopment PCBA
• ODM/OEM: Welcome
• Transport Package: , FT4222h
• Specification: serial Uart Ttl Cable With Ftdi
• Trademark: Caratar
• Origin: Guangdong, China

Product Description

FTDI UMFT4222EV-D Development Board, USB 2.0 Hi-Speed to QuadSPI/I2C, FT4222H, VQFN-32

Product Description

 Product Overview

FT4222H evaluation module with D version chip. The UMFT4222EV is a development module which uses FT4222H, a Hi-speed USB2.0 to QuadSPI/I2C bridge in compact 32-pin QFN package. The FT4222H requires an external crystal (12MHz) for the internal PLL to operate. It supports multi-voltage IO, 3.3V, 2.5V or 1.8V. It also provides 128 bytes one-time-programmable (OTP) memory space for storing vendor specific information. The FT4222H contains SPI/ I2C configurable interfaces.

• UMFT4222EV is fully compliant with the USB 2.0 specification
• SPI interface
• Configurable GPIOs controlled by application software via USB bus
• Support battery charger detection
• Bus-powered and self-powered USB power configurations
• Integrated power-on-reset circuit
• True 3.3V CMOS drive output and TTL input
• UMFT4222EV is supplied as a small PCB designed to plug into a standard 0.8" wide 24 pin DIP socket

Part No: UMFT4222EV-D

FT4222H evaluation module, USB Hi-Speed to SPI/I2C Master/Slave, VQFN-32

Hi-Speed USB2.0 to QuadSPI/I2C Bridge IC Development Module for FT4222HQ-D

•  Data Rates: Up to 53.8Mbps in QuadSPI master mode
•  
•  Interfaces: SPI/I2C/GPIO
•  
•  USB Connector: Micro B
•  
•  Packages: N/A
•  
•  Channels: Up to 4 (depending on mode)
•  
•  I/O Connector: 0.8" wide 24 pin DIP
•  
•  I/O Voltage: 1.8V to 3.3V
•  
•  USB Class: Vendor
•  
•  Virtual Com Port: No
•  
•  FTDI Internal IC: FT4222H
• 

The UMFT4222EV-D is a development module which uses the FTDI FT4222H, a Hi-Speed USB2.0 to QuadSPI/I2C device controller in compact 32-pin QFN package. FT4222H requires an external Crystal (12MHz) for the internal PLL to operate. It supports multi-voltage IO, 3.3V, 2.5V or 1.8V. It also provides 128 Bytes of one-time-programmable (OTP) memory space for storing vendor specific information. The FT4222H contains SPI/I2C configurable interfaces. The SPI interface can be configured as master mode with single, dual, or quad bits data width transfer or slave mode with single bit data width transfer. The I2C interface can be configured as master or slave mode

The UMFT4222EV is supplied as a small PCB which is designed to plug into a standard 0.8″" wide 24 pin DIP socket. All components used, including the FT4222H are Pb-free (RoHS compliant).