Gigabit Passive Poe Injector and Splitter Cable 9~48V 100ombps

Product Description

Poe Splitter  Adapter Cable for IP Camera, 1pair (POE Splitter+POE Injector) , Supply Power 9-48V/1A, RJ45 connection

Product Description

Gigabit PoE Passive Cable 
Support 10/100/1000 mbps 
 

Type	Passive POE
Input	9-48V ( Accepts up to 56V)
Power	4,5 Cable Pins- 9-48V; 7,8 Pins-Return
Max. Current	2A
Ethernet Cable Length	Up to 60m
Ethernet Speed	10/100/1000Mbps

Poe Adapter for powering any Router BOARD over gigabit Ethernet.
Simply connect your power source and then use an Ethernet cable to connect the injector to the router RouterBorad device.                                
Help reducing number of wires that lead up the power .
Power over pins 4 and 5 is used to power and communicate with 10/100/1000Mbps devices.                          
For using with any Gigabit Routerboard that supports 9-48V POE.   
 

Passive Gigabit POE splitter/ Gigabit POE injector Specifications:

Model	POEGSP-4812S
POE Input / Output Specifications
DC Input Voltage	9-48V ± 5 % max 56V
DC Output Voltage	9-48V ± 5 %
Max Output Current	2A Max.
Over Current Protection	None
POE General Sepcifications:
Operating Temperature	0^oC ~ +45^oC
Storage Temperature	-30^oC ~ +70^oC
CASE OF MATERIAL	PVC
Ethernet Date Rate	10/100/1000Mbps
Ethernet Cable	TIA/EIA 568 Cat.5
Humidity	Up to 90%
Weight	28g
DC Jacks	2.1x5.5mm
Length	210mm

 

 

 

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
 
Contains: INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
 
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 -
 
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
 
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
 
 
Input / Output Specifications
 
DC Input Voltage:UP to 60VDC
DC Output Voltage:UP to 60VDC
Max Output Current 1.5A-2A Max.
Over Current Protection None
Work range:below 30 meters.
 
General Sepcifications:
Operating Temperature -40°C ~ 60°C (-40°F ~ 140°F)
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 55g
DC Plugs 2.1mmx5.5mm
Length 170mm

 

Cable Kit Include:

PoE Splitter x1

PoE Injector x1

Power Over Ethernet Passive POE Injector 24V 48V

 

2 RJ45 connectors ( PoE and Lan port )
2.1*5.5mm & 2.5*5.5mm female DC plug

Ethernet Date Rate: 10/100/1000Mbps

Case of Material: ABS 94V-0/PC

CE/ROHS approval

Product Description:

This Gigabit Power over Ethernet injector allows you to power Phones, Cameras, Access points and other devices remotely and eliminates the need for 110vac transformers at the far end.

 

This injector uses 802.3af mode b - pins 4/5 for plus power, and 7/8 for ground shared with data.

 

Many popular devices like Ubiquiti and Mikrotik use this method to centralize the power source - you can go for 328 ft with a 24v supply to a typical Access Point.

 

Connect the power supply you need (24v for Ubiquiti or Mikrotik, 48v for others) and reduce the mess of cables. Reboot devices from one central location. We use these in our own installations and are making them available for others.

 

Application:

Wireless AP, can be used with Mikrotik / UBNT wireless bridge

Wireless routers, switches, Internet phones, gateways, access control, security monitoring, etc.

Gigabit PoE injector

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.

Helps refucing number of wires that lead up the tower. Power over spare pairs is used to power and communicate with 10/100/1000 Mbps devices.

For using with any RouterBOARD that supports 9-48V PoE.
Details
Product code RB/GPOE
Input Voltage 9-48V DC
Output Voltage any