Standard Network Power Over Ethernet Input and Output Splitter Adapter Enables Poe Splitter Cableadapter IEEE802.3af 12VDC 1A

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: 9-48v gigabit poe injector
• Transmission Rate: 1000Mbps
• Ports: ≦8
• Standard: Support IEEE 802.3/802.3X/802.3u
• Power Supply: 12V~+24vpoe Supply
• Typee: Ethernet Module
• Product Name: 12V Poe Splitter Adapter,10/100Mbps
• Transport Package: Factory
• Specification: Customization
• Trademark: Caratar
• Origin: Cn; Gua

Product Description

IEEE 802.3af Active PoE Splitter Power Over Ethernet 48V to 12V 2A ...

Product Description

 Supply power and transfer data via a single Ethernet cable remotely to non-PoE devices like some IP cameras, wireless access points and VoIP phones which need 12V DC input in a 2.1mm x 5.5mm barrel jack.

Features:

Name:Active Gigabit PoE Splitter Adapter, IEEE 802.3at compliant, Up To 100 meters, 5V / 12V /18v Output

Compliant with IEEE 802.3af
Isolation: 2.5kV
Power Input: DC48V
Power Output: DC12V 2A
Data Output Port: RJ45 Male
Power Output Port: 5.5x2.1mm DC Power Supply
Data Transfer Rate: 10/100Mbps
Devices will be detected before poe input
Power Pin: support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)

Voltage	Popular V	Current	Work Amp	Overload Amp	Non-Loading Amp
44-57V	48V	500-550mA	10-350mA	350-500mA	Max 5mA
Mark: PD device ask 3.84-12.95W , Max 13W

    

48V to 12V Active PoE Splitter

• Deploy remote non-PoE devices with no nearby AC outlets and upgrade them to PoE from up to 400 feet.
• 2.1mm x 5.5mm 12V DC barrel jack for IP camera, wireless access point and VoIP phone, supplies up to 2A.
• Power over Ethernet IEEE 802.3af/at compliant, compatible with 44-57V DC voltage, overvoltage protection.
• 10M/100M data transfer rates, an 802.3af compliant PoE injector or PoE switch is required (not included).

POE Splitter Cable Adapter IEEE802.3af 12VDC 1A For IP Cameras

Main Features:

• RJ45 female INPUT Port:
• Support the IEEE 802.3af the Power over Ethernet PoE Switch
• Support 48V Unsolicited Power Over Ethernet PoE Switch
• Support 48V Unsolicited Power Over Ethernet PoE Adapter

Specification:

• Compliant with IEEE802.3af 15.4W
• Power Input: DC44~57V
• Power Output: DC12V, max 1A
• Splits the 48V DC power over RJ-45 Ethernet cable into different DC output
• Data & Power INPUT Port: from RJ45 female
• Data Output Port: RJ45 Male
• Power Output Port: 5.5x2.1mm DC Power Plug
• Data Transfer Rate: 10/100Mbps
• Devices will be detected before poe input

   

Detailed Images

           

 

Product Application

 

           

           

              Smilar Model: 

***Standard Network Power Over Ethernet Input And Output Splitter Adapter Enables ***

               

Description:

•  Power 15.4W
• Output : 12V
• Input : DC48V
• Support 10/100Mbps
• IEEE802.3af standard
• Size: 84x 23 x 24mm
• Power in support: 1236 pin

Features:

 

• Support the IEEE 802.3af the Power over Ethernet standard.
• Support 10/100Mbps data transmission.
•  PoE Splitter receiving end supports variety of voltage of 44V-57V transfer.
• Provide 12V 1A power to adapt to a variety of small network equipment.
• Circuit isolation protection, effective protection of electrical equipment.
• High quality design guarantees the stability and reliability of the equipment in work.

Technical Specification:

 

 

POE Parameters:

•  Maximum Power: 15.4W (IEEE 802.3af)
• Input voltage :40-57V
• Output voltage: 12V

Connect Port:

•  Input: an input RJ45 interface
• Output: an output RJ45 connector and a DC output interface
• Data transfer rate: 10/100Mbps
• maximum transmission distance: 100 meters

Network standards:

• IEEE802.3i 10 BASE-T,
• IEEE802.3i 100 BASE-TX,
• IEEE802.3x flow control
• IEEE802.3af /IEEE802.3at